Www_Xbox_Com_Dns-Help
DNS isn’t resolving Xbox server names – The Windows Club
Download PC Repair Tool to quickly find & fix Windows errors automaticallyA common error that Xbox gamers can encounter on their Xbox console when using a wireless network is DNS isn’t resolving Xbox server names. In this post, we will identify the most likely cause of the error and provide the most suitable solutions to the you encounter this issue, you’ll receive the following full error message;Unplug the power from your router or modem for 30 seconds, then plug it back in. Wait another 30 seconds. When ready, check ’ll encounter this issue when the Xbox console can’t resolve a valid DNS address to connect to the isn’t resolving Xbox server namesIf you’re faced with this issue, you can try our recommended solutions below in no particular order and see if that helps to resolve the restart console and routerManually set DNS address on consoleChange WiFi channel width to 20MhzReset router to Factory SettingsUse Wired ConnectionLet’s take a look at the description of the process involved concerning each of the listed solutions. 1] Hard restart console and routerBefore you try this solution, make sure that you unplug the main power supply of both the console and router, as this will ensure that all the capacitors are discharged and there are no discrepancies when reconnecting to the hard restart console and router, do the following:Press and hold the Xbox logo on your console for about 5-8 seconds until it shuts down the power cable after shutting it turn off your router and also unplug its power for approximately 2-3 minutes before plugging in and turning on both connecting your Xbox to the internet again and see if the DNS isn’t resolving Xbox server names issue is resolved. If not, try the next solution. 2] Manually set DNS address on consoleDo the following:Open your Xbox console and navigate Settings from the home Settings, select vigate to Advanced settings using the navigation pane present at the left side of the DNS settings present at the bottom left side of the DNS settings, select, change the Primary DNS address to 8. 8. 8 and click Enter to proceed to add the secondary DNS the Secondary DNS address to Enter to save your you will be back to the Wireless Settings page, press B to save your Xbox console will automatically try connecting to the internet and prompt you if the connection is successful. 3] Change WiFi channel width to 20MhzSelecting the 20Mhz channel width for your router is another potential resolution for this error if that’s not its current channel change the router WiFi channel width to 20mhz, do the following:Run IPconfig on a Windows a note of the Default Gateway a your Default Gateway number in the URL Enter on the the wireless settings within your router’s configuration 20Mhz on the Channel Width drop-down, see if the Xbox console connects successfully to the internet, otherwise try the next solution. 4] Reset router to Factory SettingsThis error might occur if the router has a wrong configuration or setting. To rule out this possibility, you can reset the router to factory settings. Here’s how:Press and hold the Reset button which is at the back of the router for about 10 seconds until all the light on the router flash for the router powers back on, check whether the network connection goes back to normal and the Xbox console can connect without ternatively, you can reset the router as follows:Open the web browser and type in the router IP you don’t know the IP address, you can check on the bottom of the, input the WiFi router username and password. By default, both the username and password are to Tools > System the Restore Default Settings button when you see resetting router to factory default settings doesn’t resolve the issue at hand, try the next solution. 5] Use Wired ConnectionIf nothing has worked so far, you can consider using a wired connection this helps! Related post: Can’t connect to Xbox Onwusobalu, has studied Information & Communication Technology and is a keen follower of the Windows ecosystem. He runs a computer software clinic. He says it’s best practice to create a System Restore Point before making any changes to your PC.
Changing DNS on Popular Gaming Systems (PS4, XBox1, WiiU)
Changing DNS on Popular Gaming Systems (PS4, XBox1, WiiU)
IOS 10 Device Configuration for OpenDNS
IOS 11 Configuration for OpenDNS
Android Configuration instructions for OpenDNS
Amazon Kindle Fire
Sony Blu-Ray Media Player – bdp s3100
Apple TV
Follow
Introduction
This article will explain how to change the DNS settings on the Playstation 4, XBox One, and Nintendo Wii U. This general concept should help in changing DNS on other gaming systems, as well.
Solution
Playstation 4:
From the PS4 Menu, scroll right to Settings > Network > Set Up Internet Connection > Select either Wi-Fi or LAN cable (Wired)
Wi-Fi: Custom > Select Network > Enter Password (automatically saved if you are already using this network) > IP Address Settings (automatic) > DHCP Host Name (Do Not Use) > DNS Settings (Manual)
LAN (Wired): Custom > IP Address Settings (Automatic) > DHCP Host Name (Do Not Use) > DNS Settings (Manual)
From there, enter the Primary DNS as “208. 67. 222. 222” and the Secondary DNS as “208. 220. 220”
Next > MTU Settings (Automatic) > Proxy Server (Do Not Use) > Test Internet Connection
Xbox One:
From the Xbox One home screen, go to Settings > Network > Advanced settings > DNS settings > Manual. (If Settings doesn’t appear on the home screen, select My Games & Apps, then Settings. )
From there, enter the Primary DNS as “208. 222” and the Secondary DNS as “208. 220”
Wii U:
From the Wii U Menu, select “System Settings. ”
Using the Left Stick, select the “Internet” icon and press the A Button.
Tap “Connect to the Internet. ”
Press the X Button or tap “Connections” in the top-right corner.
Select the connection you wish to configure.
Tap “Change Settings. ”
Tap the arrow on the right and select “DNS. ”
Tap “Don’t Auto-Obtain” and enter in the DNS info as follows:
Tap “Primary DNS” and enter in 208. 222, ensuring you are entering the “. ” between each number, then tap “OK” to return to the DNS screen.
Tap “Secondary DNS” and enter in 208. 220, then tap “OK” to return to the DNS screen.
Tap “Confirm” to return to the manual settings screen.
You can now test to see if your console is routing DNS queries to OpenDNS by visiting the following domain in the web browser of your device:
If you are having any difficulties with this, please feel free to email Support:
Related articles
Windows 10 Configuration
Apple TV
Fix: DNS isn’t resolving Xbox server names – Appuals.com
The error “DNS isn’t resolving Xbox server names” usually occurs when Xbox console is not able to resolve a valid DNS address in order to successfully connect to the internet. This issue usually occurs when you are using a wireless network for access and is also a very common is an important decentralized naming system which is required to work perfectly when you are connecting to the internet. Even though the complexity might seem a little high, the issue can be resolved using very basic troubleshooting methods listed down lution 1: Resetting your Console and RouterBefore we move on to assigning a pre-defined DNS address to the console or resetting your router, we can try power looping your console and router. Most of the time just closing the console and turning it back on resolves the majority of the problems. When we reset the console, all the network configurations currently assigned are lost and they take a fresh sure that you plug out the main power supply of both the devices when following out this solution. This will ensure that all the capacitors are discharged and there are no discrepancies when we try connecting to the network and hold the Xbox logo on your console for about 5-8 seconds until it shuts down completely. Take out its power cable after shutting it turn off your router and also plug its power for approximately 2-3 minutes before plugging in and turning on both connecting your Xbox to the internet again and check if the problem got lution 2: Setting DNS ManuallyIf the console is unable to set the DNS automatically, we can try setting Google’s address as its DNS and check if this solves the problem. You can always revert back the changes using the same method and select “Set DNS Automatically” your Xbox console and navigate to its “Settings” from the home “Network” when you are in the console’s settings. It should be beneath the sub-heading of ‘console’ in network, navigate to “Advanced settings” using the navigation pane present at the left side of the use your controls to select “DNS settings” present at the bottom left side of the in DNS settings, use your controls and select “Manual”. Your DNS settings will probably be automatic at this point but we will try setting them with a manual the Primary DNS address to “8. 8. 8” and click Enter to proceed to add the secondary DNS the Secondary DNS address to “8. 4. 4”. Press Enter to save your you will be back to the Wireless Settings. Press “B” to save your your Xbox console will automatically try connecting to the internet and prompt you if the connection is successful. You are now connected to the internet without any lution 3: Resetting your Router to Default SettingsIt can be possible that your internet router may be saved in a wrong configuration. Or any recent settings may have caused it not to work properly. Of course, you should try to restart the router first and check, but, if that doesn’t work, we can try resetting the router (hard-reset) manually and see if it improves our It is worth noting that after you manually reset your router, your router won’t have any SSID (password) and the name of your WiFi will be set to default (something like TPlink121). Furthermore, any internet settings that your internet provider have set on it will be removed. Do not perform this method unless you know those settings or your router works as a plug and play. It can be a real pain to call up the provider and ask them to guide how to make the internet working again so always keep this factor in mind. All the connected devices will be disconnected and you will have to re-connect all the devices one by one up your router and turn it back so all the ports are in front of for any button named “reset” on its back. Most routers don’t have buttons so you don’t accidentally reset it to factory defaults, instead, you have to use something thin like a pin to press inwards towards the hole which says “reset” your router and check if the Xbox console is able to connect to the internet is also an option to reset your router settings through the web page using your default gateway IP address. You can use this method if you are unable to reset your router manually. Once again, the note written above applies to this solution too so it’s best to keep all of those things in your web browser and type in the IP address of the router (if you don’t know this, it will most probably be written on the back of your router or in its box/manual). It will look something like 192. 168. 1. 1Press enter. Now the router will ask you for the username and password before it allows you access. The default ones are admin/admin. If this isn’t working and you don’t remember the credentials, you can always contact your internet provider and ask on the Tools tab on the top and the System Commands on the you will be seeing a button named Restore Default Settings. Click it. You will be disconnected with your router and it will resort back to factory Do note that the menu configuration may be different for each router. You can easily type in your model number in Google and see how to reset the router (if you are unable to reach the factory reset button yourself) connecting back to the internet try connecting Xbox to the internet again. Solution 4: Using a Wired ConnectionIf you are unable to connect to the internet using all the above methods, you can try using a wired connection to the Xbox instead. There were many reports from various users that when they couldn’t connect using the wireless network, they plugged in a wired connection and the Xbox was able to successfully connect without any further problems. Make sure that you insert the wire into the correct slot and you insert it fully. Make sure it is also connected properly on the other end. Restart your Xbox after making
Kevin is a dynamic and self-motivated information technology professional, with a Thorough knowledge of all facets pertaining to network infrastructure design, implementation and administration. Superior record of delivering simultaneous large-scale mission critical projects on time and under budget.
Frequently Asked Questions about www_xbox_com_dns-help
How do I fix my DNS server on Xbox Live?
Do the following:Open your Xbox console and navigate Settings from the home page.In Settings, select Network.Navigate to Advanced settings using the navigation pane present at the left side of the screen.Select DNS settings present at the bottom left side of the screen.In DNS settings, select Manual.More items…•May 7, 2021
How do I find my Xbox DNS server?
Xbox One:From the Xbox One home screen, go to Settings > Network > Advanced settings > DNS settings > Manual. (If Settings doesn’t appear on the home screen, select My Games & Apps, then Settings.)From there, enter the Primary DNS as “208.67. 222.222” and the Secondary DNS as “208.67. 220.220″Nov 12, 2020
What does it mean when DNS isn’t resolving Xbox server names?
The error “DNS isn’t resolving Xbox server names” usually occurs when Xbox console is not able to resolve a valid DNS address in order to successfully connect to the internet. This issue usually occurs when you are using a wireless network for access and is also a very common one.Jul 12, 2021
