Turn Off Ipv6 Android
How to disable IPv6 on Android? – Surfshark Customer Support
This article will show you how to disable IPv6 on your Android device.
Currently, Surfshark does not support IPv6 addresses. Therefore, we recommend disabling IPv6 as it may cause connectivity issues.
This method will disable IPv6 support on your mobile data network. Unfortunately, it is not possible to disable IPv6 through Wi-Fi network settings on an Android device.
You will need an Android device running Android 5. 0 or later and an active Surfshark subscription. If you don’t have the subscription yet, you can get it here.
Please do mind that your Android graphical interface might be slightly different from the screenshots.
Launch the Settings app.
Tap on Network and Internet.
Tap on Mobile network.
Scroll down and tap on Advanced.
Tap on Access point names.
Tap on your current mobile network.
You will need to select the IPv4 option in both APN protocol and APN roaming protocol.
Tap on APN protocol and select IPv4. Do the same for APN roaming protocol as well.
Congratulations – you have successfully disabled IPv6 on your Android mobile network!
If you have any further questions, our customer success team is here to help you 24/7 over live chat or email.
You may also be interested in:
How to enable the GPS override function?
How to fix unstable connection issues on Android?
How to watch Netflix with Surfshark?
Was this article helpful?
IPv6: How To Disable – LSU GROK Knowledge Base
IPv6: How To Disable
To Disable IPv6:
1. Use the shortcut, Windows Key + X to open the Control Panel.
2. Open Network and Internet.
3. Open Network and Sharing Center.
4. Click Change Adapter Settings.
5. Right-click your connection and go to Properties.
6. Uncheck the box next to Internet Protocol Version 6 (TCP/IPv6) to disable it.
7. Select OK to confirm the change.
Referenced from:
Article ID:
17573
Last Updated:
6/21/2021 11:12:08 AM
Article Rating (Optional):
Email Address (Optional, unless you would like to hear back from us):
Comments:
GROK is a resource of Louisiana State University developed and maintained with support of the LSU Student Technology Fee. We love getting feedback from the general public, but our support efforts are generally dedicated to the LSU community. Thanks for your understanding!
IPv6 – Google Wifi Help
Send feedback help content & informationGeneral Help Center experienceLearn about Wifi productsGet startedFeatures and settingsFix a problemWarranty, manual & returnsYour privacy What is IPv6?
Internet Protocol version 6 (IPv6) is an advanced networking standard that allows devices to use a much larger number of unique IP addresses than in the older standard (IPv4). With billions of devices already on the internet, and continuing to grow at a rapid rate, the older IPv4 standard is unable to provide enough unique addresses for new devices.
Additional IPv6 benefits
More efficient packet routing thanks to a prefix allocation scheme that allows data to flow more efficiently through routers on the internet.
More flexible address scoping rules designed to support a broader range of usage scenarios for all types of networks.
Streamlined network software stack processing thanks to the elimination of router fragmentation and separation of optional information into secondary headers.
Built-in support for advanced security mechanisms, like IPSEC.
Direct peer-to-peer communication is now possible anywhere on the planet due to the elimination of the need for Network Address Translation (NAT).
Better network management scaling than stateful protocols (such as DHCP for IPv4) due to client-driven address configuration.
Many of the core connectivity operations in IPv6 use multicast communication, which means clients can register to be awakened only when they receive certain types of communications. This allows for greater power savings without the use of platform-specific mechanisms such as Wake-on-LAN.
How IPv6 works with Google Nest Wifi and Google Wifi
Google Nest Wifi and Google Wifi use a dual-stack implementation, which means that IPv4 traffic and IPv6 traffic may coexist on the same network (both wired and wireless). Google Nest Wifi and Google Wifi do not support IPv6 transitional protocols such as 6to4 or 6rd. Additionally, Google Nest Wifi and Google Wifi do not support IPv4 over IPv6 or IPv6+.
For IPv6 to work, all of these entities must support it:
Your Internet Service Provider (ISP) (must also support IPv4; we don’t support IPv6-only connections)
Your client devices
The operating system and applications running on your client devices
When IPv6 is enabled on Google Nest Wifi or Google Wifi, it uses the DHCPv6 protocol on its WAN port to request an address from your ISP. If the ISP supports the DHCPv6 protocol and has provisioned addresses for routers, then the router will obtain its own IPv6 address.
If the ISP has not provisioned addresses for routers, then the router will obtain its address using a procedure called StateLess Address AutoConfiguration (SLAAC or “slack”). The router also requests an IPv6 prefix from the ISP, which is used to send the IPv6 router advertisements to the clients on the LAN, to allow them to derive their own addresses.
If the ISP provides a usable prefix, Google Nest Wifi and Google Wifi will start sending IPv6 routing advertisements to clients on the LAN to allow them to pick and validate their own IPv6 addresses using the SLAAC (or “slack”) procedure.
Turn on IPv6
Find the IPv6 Prefix for a router or primary Wifi point
The IPv6 prefix is the equivalent of a WAN address in IPv4. It’s provided by your ISP. Routers and clients use the prefix to assign the rest of the address and generate the complete 128-bit IPv6 address. The prefix is only associated with the router or primary Wifi point in a mesh network. Additional points use SLAAC to construct their own addresses.
Open the Google Home app.
Tap your Google Nest Wifi router or primary Wifi point Settings Device information.
Your IPv6 prefix (IP address) is located under “Wi-Fi information. ”
Find IPv6 IP addresses for a connected device
You can find a connected device’s IPv6 addresses from the device’s details page. (It can take up to 1 minute for the addresses to show. ) Note: Each device may have multiple IPv6 addresses listed.
Tap Wi-Fi Devices.
Tap a device to view its’ details.
Custom IPv6 DNS server
You can set a custom IPv6 DNS server in the Google Home app.
Google Nest Wifi and Google Wifi feature behavior with IPv6
IPv6 reachability testing
To ensure a robust IPv6 connection, Google Nest Wifi and Google Wifi periodically run connectivity tests in the background. These tests validate the operation of IPv6 connections from your Wifi devices to the Google infrastructure network. The results of these periodic tests may vary and, depending on the robustness of your ISP’s IPv6 network, your IPv6 connection might become disabled. The tests run automatically and will attempt to restore IPv6 service.
IPv6 port forwarding or port opening
Port forwarding is used with NAT on IPv4 networks. IPv6 networks don’t use NAT for port forwarding. DHCP IP reservations (aka static IP reservations) are not used with IPv6 addresses and aren’t required for IPv4 connections. Learn how to set up port forwarding or port opening.
IPv6 on guest network
Google Nest Wifi and Google Wifi support IPv6 on all LAN connections, including wired LAN and private WLAN. Google Nest Wifi and Google Wifi also support guest networking for IPv6, however your ISP must provide a network prefix length that’s less than 64 bits to allow for proper subnet addressing. If the ISP’s prefix is 64 bits, IPv6 won’t be available on the guest network.
Was this helpful? How can we improve it?
Frequently Asked Questions about turn off ipv6 android
Should I disable IPv6 on Android?
Therefore, we recommend disabling IPv6 as it may cause connectivity issues. This method will disable IPv6 support on your mobile data network. Unfortunately, it is not possible to disable IPv6 through Wi-Fi network settings on an Android device.Aug 25, 2021
How do I turn off IPv6?
To Disable IPv6:Use the shortcut, Windows Key + X to open the Control Panel.Open Network and Internet.Open Network and Sharing Center.Click Change Adapter Settings.Right-click your connection and go to Properties.Uncheck the box next to Internet Protocol Version 6 (TCP/IPv6) to disable it.More items…•Jun 21, 2021
How do I enable IPv6 on my Android phone?
Turn on IPv6Open the Google Home app .Tap Wi-Fi Settings. Advanced Networking.Turn on IPv6.Tap Save .
