Get Http_Proxy Windows
Find Proxy Settings on Your Computer (for Local Testing …
We use cookies to enhance user experience, analyze site usage, and assist in our marketing efforts. By continuing to browse
or closing this banner, you acknowledge that you have read and agree to our Cookie Policy,
Privacy Policy and Terms of Service.
You can find the proxy settings applicable to your machine and use them to set up Local Testing connections.
Introduction
A proxy server sits between your machine and your ISP. In most organizations, proxies are configured
by network admins to filter and/or monitor inbound and outbound web traffic from employee computers.
In this article, we’ll show you how to view proxy settings (if your computer is behind a proxy server).
You can then use the information to set up Local Testing connections with BrowserStack..
Find Proxy Settings in Windows
In most cases, browsers will use proxy settings that are set on the computer. However, each browser has a
settings page to configure proxy settings as well.
There are two ways to find proxy settings in Windows: via the Settings app (Windows 10 only) or via the
Control Panel.
Using the Settings App (Windows 10) to find proxy settings
Click on Start, then click on the gear icon (Settings) at the far left.
In the Windows Settings menu, click on Network & Internet.
In the left pane, click on Proxy.
Here you have all the settings that are related to setting up a proxy in Windows. It’s split into
two configurations: Automatic or Manual proxy setup.
Using the configuration details to set up Local Testing connection:
If “Use setup script“ is enabled, it means that you have configured PAC proxy on your system. You
can obtain the path to PAC file from the “Script Address“ section.
Note: To set up a Local Testing connection using the PAC file, you need to ensure that the PAC file is stored on your computer and path needs to an absolute path to that file.
If “Manual proxy setup” is enabled, you can simply obtain Proxy Host and Port from the “Address“
and “Port“ section.
For Local Testing to work correctly, you need to bypass the traffic for – – from your
proxy. You can do this by adding an entry in the Proxy Exception> text field in the
“Manual proxy setup” section.
Using Control Panel (all Windows versions) to find proxy settings
In any Windows version, you can find the proxy settings via the Control Panel on your computer.
Click on Start and open the Control Panel. Then click on
Internet Options.
In the Internet Options, go to Connections > LAN settings.
Here you have all the settings that are related to setting up a proxy in Windows. It’s basically
split into two configurations: either Automatic configuration or
Proxy Server setup.
If “Use automatic configuration script“ iis checked, it means that you have configured PAC proxy
in your system. You can obtain the path to PAC file from the “Script Address“ section.
If “Use a proxy server for your LAN” is checked, you can obtain Proxy Host and Port from the
“Address“ and “Port“ section.
proxy. You can do this by clicking the “Advanced“ button and adding an entry in the
“Do not use proxy server for addresses beginning with:“ text field.
Find Proxy Settings in OS X
On OS X, you have to view the proxy settings in System Preferences. This is where most browsers check automatically. However, each browser has a settings page to configure proxy settings as well.
Open System Preferences and click on Network.
On the left-hand side, click on an active network connection. Note that you can have different proxy settings for different network connections. Click on the Advanced button on the bottom right.
Click on the Proxies tab and you’ll see a list of proxy protocols you can configure.
If “Automatic Proxy Configuration“ is checked, it means that you have configured PAC proxy in your system. You can obtain the path to PAC file from the “Script Address“ section.
If “Web Proxy (HTTP)” or “Secure Web Proxy (HTTPS)“ is checked, you can simply obtain Proxy Host, Port, Username, and Password.
For Local Testing to work correctly, you need to bypass the traffic for – – from your proxy. You can do this by adding an entry in the ”Bypass proxy settings for these Hosts & Domains” text field.
Connection duration and disconnection
In Linux, finding your proxy settings will depend on what distribution you are running. Mostly, the procedure would be similar for the various distributions.
On Ubuntu, open on System Settings from the launcher and scroll down to Hardware. Click on Network.
Click on Network Proxy, you can choose from Automatic or Manual.
If the “Automatic“ option is selected, it means that you have configured PAC proxy in your system. You can obtain the path to PAC file from the “Configuration URL“ section.
If the “Manual“ option is selected, you can simply obtain Proxy Host and Port from the appropriate section.
For Local Testing to work correctly, you need to bypass the traffic for – – from your proxy. You can do this by using the command-line interface as follows:
To change proxy exceptions, use ‘set’ option with ‘gsettings’ command as follows.
$ gsettings set ignore-hosts “[‘localhost’, ”, ‘::1’]”
If access to the above sections is restricted on your computer, you can seek help from your IT/Network Team to gather this information.
How do I know what proxy server I’m using? – Super User
I need to know what the address for my proxy server is so I can configure another program to also use it. If I go into IE, Internet Properties, LAN Settings, then all I see is an automatic configuration script but not the actual proxy address. How can I get this?
I’m using Windows XP.
studiohack♦13. 4k19 gold badges83 silver badges117 bronze badges
asked Oct 14 ’11 at 1:12
Mike ChristensenMike Christensen3, 65112 gold badges30 silver badges39 bronze badges
1
The auto proxy detection system works by downloading a file called from the host wpad. First confirm this host exists from a command prompt:
ping wpad
If it doesn’t exist, you may have to put the correct DNS suffix. In the same command prompt, type
ipconfig /all
You should see a Primary DNS Suffix and a DNS Suffix Search List
Try appending each of these with a. to wpad:
ping wpad.
Toward the bottom of this file, you should see a line saying
PROXY
It might be repeated if you have multiple proxies available. The host and port are what you need.
If this file doesn’t exist, then either there is no proxy server, or the proxy server is being provided by dhcp (note that this would only work with IE, so if firefox can surf, this is not the method being used). If you don’t have access to the dhcp server to see what it is sending, the easiest way would be to open a site in ie, then go to a command prompt. Type
netstat -ban
This will provide a list of connections made with the process id of each process. Go to Task Manager, and select View/Select Columns and enable PID (Process Identifier). Look for the PID of in the list returned by netstat -ban This will reveal the proxy ip and port.
answered Oct 14 ’11 at 1:22
9
See edit below.
I have one more easy way to find it.
Install chrome and go to below URL to see the proxy details
chromenet-internals/#proxy
You will be able to see all the details
EDIT September 2020
As stated in the comment by @RMorrisey, you can use the following link (Chrome 85. x. x)
chromenet-export/
answered Jan 3 ’17 at 20:31
8
Try the following command in cmd:
reg query “HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionInternet Settings” | find /i “proxyserver”
Hope helps
answered Oct 9 ’14 at 8:35
LelouchzqyLelouchzqy7915 silver badges3 bronze badges
4
The following command also seems to work. As a bonus it avoids contacting lots of DNS servers that might or might not work, and it avoids querying the registry, so it functions even in fairly locked-down environments:
Windows Vista or later:
netsh win show proxy
Windows XP or earlier:
netsh diag connect ieproxy
Some additional work is required to extract the proxy address from the output, so the registry approach is simpler if you know it’s going to be available.
Update:
I’ve found that on windows 7 netsh sometimes returns different results depending on how I call it. If I run the above command manually in a prompt, I get ‘Direct Access – No Proxy’. However, calling netsh from SAS results in an actual proxy being listed!
answered Sep 23 ’14 at 11:17
user3490user34905225 silver badges13 bronze badges
12
You can also get the automatic configuration file URL from the registry by running:
reg query “HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionInternet SettingsWpad” /s | find /i “WpadDetectedURL”
answered Aug 23 ’13 at 16:11
mxfhmxfh3112 silver badges4 bronze badges
If you are using an auto-detect proxy settings then do in the address bar of you browser
(no matter which one you have installed)
wpad/
Then you will get a javascript file describing which proxy server is used according to what are you trying to visit on the network…
answered Oct 21 ’16 at 6:04
I have created a simple to show Windows proxy settings. It’s purpose is that a common user is able to run it and send the output to the admin (tech. support, etc. ).
answered Mar 29 ’16 at 12:30
Related to Nimble Fungus’s Answer, as Nimble’s answer no longer work in recent versions of Chrome. The following works in the Google Chrome Version 83. 0. 4103. 116 (Official Build) (64-bit) (Released 2020-05-19)
Go on Google Chrome, go to this link chromenet-export/ in the browser.
Click on ‘Start Logging to Disk’, choose a place to store the log file. Now on a new tab, go to a random website (I went to in my case). Then go back to the chromenet-export/ tab, and click ‘Stop Logging’. Click ‘Show File’.
Open up that file, search for the key word “proxy_server”, that variable will tell you the proxy server plus port number that you are using to connect to the internet.
answered Jul 10 ’20 at 19:22
To learn lots and lots about your current internet connection and set-up, including the proxy server you are using at the moment, go to the following address in Chrome:
chromenet-internals/
You’ll see a column on the left-hand side of the page which gives you a list of different types of information you can request, among them “proxy. ”
NOTE: it’s perfectly possible to add the “chrome:” URI scheme to windows, so that you can get this information by going to “chromenet-internals/” from ANY browser, not just chrome. But since the handler for this URI scheme needs to be chrome, you need to have chrome installed in any case. Adding the URI scheme “chrome” to your registry is therefore only really useful if you use a different browser and want to avoid the clicks/typing required to first bring up chrome (and thence to go to chromenet-internals/)
answered Feb 26 ’18 at 9:47
Not a perfect solution but worked for me when needed quick lookup in corporate network.
NetStat in cmd lists current connections. IP with port 8080 or 9090 is most likely the proxy.
answered May 24 ’19 at 15:12
Put the script path into an ie window and it will either download or open the wpad script – if it downloads it, use notepad to view as it is text based.
WPAD is a logic driven file to sent internet requests to different proxies or
direct to the internet depending on a number of factors such as source, destination, IP or url (even parts of the dns name). In some cases it could be quite hard to read depending on how complex the file is – I’ve seen some beauties, but it is fairly intuitive.
answered Feb 22 ’18 at 9:15
Not the answer you’re looking for? Browse other questions tagged windows windows-xp networking proxy or ask your own question.
How the Windows Update client determines which proxy …
INTRODUCTION
The Microsoft Windows Update client program requires Microsoft Windows HTTP Services (WinHTTP) to scan for available updates. Additionally, the Windows Update client uses the Background Intelligent Transfer Service (BITS) to download these updates. Microsoft Windows HTTP Services and BITS run independently of Microsoft Internet Explorer. Both these services must be able to detect the proxy server or proxy servers that are available in your particular environment. This article describes the various proxy server detection methods that are available. Additionally, this article describes the situations where Windows Update uses a particular proxy server detection method.
More Information
The Automatic Updates service is configured to download and install updates from the Microsoft Windows Update Web site
The Automatic Updates service can automatically download and install updates from the Windows Update Web site. The Automatic Updates service does not require user interaction because this service runs in the context of the Local System account. The Automatic Updates service does not have access to the user-specific proxy server settings that may be configured in Internet Explorer. WinHTTP has been employed, instead of WinInet in Internet Explorer, as the Automatic Updates service affects system wide level configuration and should require administrator level control. WinHTTP is considered as more appropriate in this type of usage scenario. The Automatic Updates service can only discover a proxy server by using one of the following methods:
The proxy server is manually configured by using the tool for Windows XP and Windows Server 2003. For Windows Vista and newer OS, Netsh command is available to manually configure the proxy server. For more information about how to use the tool, click the following article number to view the article in the Microsoft Knowledge Base:
289481 You may need to run the Proxycfg tool for ServerXMLHTTP to work
Web Proxy Auto Detect (WPAD) settings are configured in either of the following locations in the network environment:
The Domain Name System (DNS) options
The Dynamic Host Configuration Protocol (DHCP) options
For more information about a related topic, click the following article number to view the article in the Microsoft Knowledge Base:
816320 How to configure firewall and Web proxy client Autodiscovery in Windows Server 2003
Internet Explorer is used to access the Windows Update Web site
If you use Internet Explorer to access the Windows Update Web site, the Windows Update client program discovers a proxy server by using the following methods in the order that they appear in.
Method 1: Internet Explorer is configured to automatically detect settings
If the Automatically detect settings check box is selected in Internet Explorer, the Windows Update client uses the WPAD feature to locate a proxy server. To view the Automatically detect settings check box, follow these steps:
Start Internet Explorer.
On the Tools menu, click Internet Options.
Click the Connections tab.
If you connect to the Internet by using a proxy server on the local area network, click LAN Settings. If you connect to the Internet by using a proxy server for a dial-up connection or a VPN connection, click that connection, and then click Settings.
Method 2: Internet Explorer is configured to use an automatic configuration script
If the following conditions are true, the Windows Update client locates the proxy server by processing the automatic configuration script:
Internet Explorer cannot discover the proxy server by using Method 1.
The Use automatic configuration script check box is selected in Internet Explorer.
To view the Use automatic configuration script check box, follow these steps:
If you connect to the Internet by using a proxy server on the local area network, click LAN Settings. If you connect to the Internet by using a proxy server for a dial-up or VPN connection, click that connection, and then click Settings.
Method 3: Internet Explorer is configured by using a user-defined proxy server value
If the following conditions are true, the Windows Update client uses the user-defined proxy server to connect to the Internet:
The Windows Update client cannot locate a proxy server by using automatic detection or by using an automatic configuration script.
A proxy server is defined in Internet Explorer.
To view the user-defined proxy server value, follow these steps:
Note the value that appears in the Address box under Proxy server.
Method 4: A proxy server is not specified in Internet Explorer
If no proxy server is defined in Internet Explorer, the Windows Update client uses the proxy server that was configured by using the tool. For more information about how to use the tool, click the following article number to view the article in the Microsoft Knowledge Base:
Method 5: No proxy server is configured
If the following conditions are true, the Windows Update client tries to connect to the Windows Update Web site directly:
No proxy server is configured by using the tool.
No proxy server is manually defined in Internet Explorer.
In this scenario, if a proxy server is required to connect to the Internet, the Windows Update client cannot successfully connect to the Windows Update Web site.
A description of the Web Proxy Auto Detect (WPAD) feature
The WPAD feature lets services locate an available proxy server by querying a DHCP option or by locating a particular DNS record. For more information about the advantages and disadvantages of using DNS instead of DHCP for WPAD, click the following article number to view the article in the Microsoft Knowledge Base:
A description of the tool
The tool configures WinHTTP to use a specific proxy server by modifying the following registry entry:
HKEY_LOCAL_MACHINE SOFTWAREMicrosoftWindowsCurrentVersionInternet SettingsConnectionsWinHttpSettingsThe tool is useful if you cannot implement WPAD. Additionally, you can use this tool to help you troubleshoot proxy server discovery problems in the network. In this situation, you can use this tool to help verify that an issue occurs because of a failure to discover a proxy server by using the other discovery methods, such as WPAD. For more information about a related topic, click the following article number to view the article in the Microsoft Knowledge Base:
289481 You may need to run the Proxycfg tool for ServerXMLHTTP to work To view the command-line parameters that the tool supports, type /? at a command prompt, and then press ENTER. If you run the command by using no command-line parameters, the current settings are displayed. In this situation, you receive results that are similar to one of the following results.
Settings where no proxy server is configured
Microsoft (R) WinHTTP Default Proxy Configuration ToolCopyright (c) Microsoft Corporation. All rights rrent WinHTTP proxy settings under: HKEY_LOCAL_MACHINE SOFTWAREMicrosoftWindowsCurrentVersionInternet SettingsConnections WinHttpSettings: Direct access (no proxy server).
Settings where a proxy server is configured
Microsoft (R) WinHTTP Default Proxy Configuration ToolCopyright (c) Microsoft Corporation. All rights rrent WinHTTP proxy settings under: HKEY_LOCAL_MACHINE SOFTWAREMicrosoftWindowsCurrentVersionInternet SettingsConnections WinHttpSettings: Proxy Server =
To configure a proxy server by using the tool
To use the tool to configure a proxy server, follow these steps:
Click Start, click Run, type cmd, and then click OK.
At the command prompt, type proxycfg -p proxyservername:portnumber, and then press ENTER. In this command, replace proxyservername with the fully qualified domain name of the proxy server. Replace portnumber with the port number for which you want to configure the proxy server. For example, replace proxyservername with and replace portnumber with 80.
If the proxy server is successfully configured, the following results appear:
To remove a proxy server by using the tool
To use the tool to remove a proxy server and to configure “direct access” to the Internet, follow these steps:
At the command prompt, type proxycfg -D, and then press ENTER.
Note If one of the following conditions is true, a proxy server does not appear in the results of the command:
The proxy server is manually configured in Internet Explorer.
The proxy server is configured by using a configuration script.
The command is only used to manually configure the proxy server that WinHTTP uses. If you use WPAD to specify a proxy server, or if you use Internet Explorer to specify a proxy server, the results of the command should indicate a value of Direct access (no proxy server).
For Windows Vista and above, tool is available in place of use the tool to configure a proxy server, follow these steps:
At the command prompt, type netsh win set proxy proxyservername:portnumber, and then press ENTER. For example, replace proxyservername with and replace portnumber with 80.
At the command prompt, type netsh win reset proxy, and then press ENTER.
To verify the current proxy configuration by using the tool
To use the tool to verify the current proxy configuration, follow these steps:
At the command prompt, type netsh win show proxy, and then press ENTER.
Supported files
For more information about the supported types of files, visit the following Microsoft Web site:
Frequently Asked Questions about get http_proxy windows
How do I find my proxy settings?
How to set up a proxy server in AndroidOpen Android’s Settings and tap Wi-Fi to view a list of Wi-Fi networks.Long-press the Wi-Fi network name for which you want to change the proxy settings. Tap Modify Network.Tap Advanced Options.Tap Manual to change your proxy’s settings. … Tap SAVE.Mar 11, 2020
What is the command to check proxy in Windows?
To verify the current proxy configuration by using the Netsh.exe toolClick Start, click Run, type cmd, and then click OK.At the command prompt, type netsh winhttp show proxy, and then press ENTER.
How do I get rid of Windows proxy?
Disable Auto Proxy Settings in Windows 10Go to Start Menu or Cortana.Search for Settings and open it.Select Network & Internet.From the left pane, click on Proxy.Under Automatic proxy setup, turn off Automatically detect settings option.Under Manual proxy setup, disable Use a proxy server option.More items…•Jun 19, 2019
