How To Hack An Ip
How to hack IP addresses (proven way with steps) – ICTShore …
Maybe someone scared you claiming to know your IP address. On the other hand, you could be the one trying to scare a friend by getting his IP address. Or, maybe, you just want to hear the truth about hacking IP address. Look no further, because in this guide we will give you all the truth. We will explain you how to hack IP addresses by following this agenda:
A quick introduction to what IP addresses areHow to hack IP addressesHow hackers find out an IP addressWhat can a hacker do when he knows your IP address
After reading this guide, you will be able to find out the IP address of potentially anyone, silently.
Is this legal?
Under most circumstances, it is. Knowing someone’s IP address is part of a “normal” communication over the Internet, so there is no problem in doing that. However, if you use the IP address to violate someone else’s PC, you are committing a crime under many jurisdictions. We do not endorse such activity. Everything you read should be tried on systems you own and control personally. We are not responsible for your actions.
Furthermore, remember that this is not legal advice. We are IT guys, not lawyers. If you are looking for legal advice it’s better to call your attorney.
Before Hack IP addresses
Before we start hacking, we should spend a few words on IP addresses. In IT, and in hacking specifically, never do anything without knowing what you are doing. Indeed, this concept is important here. A lot of people talk about “hack IP addresses” without even knowing what an IP address is. This can lead to unjustified fear among the ones being hacked or exaggerated glory among those who hack. What “hack an IP address” really mean? What can you do with that? Now, we are going to demystify IP address hacking.
What is an IP address?
An IP address is nothing more than a numeric identifier. It identifies a PC, smartphone, or any other device in a network, like the Internet. You can think of it like a snail mail address. If I know your snail mail address I know where you are, and I can send you some letters. With an IP address, I can know (roughly) where your device is, and send you some Internet traffic.
In other words, you are identified by your IP address over the Internet. Typically, your Internet provider assigns a public IP address to your router in your house. When your devices in your home network want to send traffic over the Internet, they will use that public IP address (shared among all of them).
The communication over the Internet happens with packets. Each piece of data is put in a packet, you can think of it as a letter. On the envelope, you always write source and destination IP addresses. The Internet will take care of delivering the packet to the right destination. Now, as you can see, if you send traffic out you will write your IP as source IP. This is the only way the other part can know it, and send some traffic back.
Do we really need to use our real IP address as source?
Of course! Imagine you want to download a movie, see a web page, or anything else you do over the Internet. You contact a third-party server, which sends you the content you requested. It needs to know where to send it, so it needs to know your IP.
Read more about IP addresses in this detailed article.
Am I in danger?
It depends, but in most cases, you aren’t. As from the paragraph above, knowing someone else’s IP is legitimate. You need it to send traffic back. What if your IP address ends up in the wrong hands? Just by knowing your IP address, nobody can harm you. However, they can start to scan your PC and see if you have vulnerabilities they can use to gain access to your data. We will get to that later.
How to find out someone’s IP address?
In the following section, we are going to cover an out-of-the-box technique. However, it relies on a simple principle: your victim needs to send you some traffic. If he does that, boom, you have his IP address. Your PC already learns such an IP address, but it doesn’t show it to you. We will see how to see it.
The Proven Way to Hack IP addresses
Some misconceptions and old techniques
The Internet is full of poor content about hacking IP addresses. You might read about hacking IP addresses with Skype and get excited about that, but since 2017 this is not possible anymore. So, for this article, we are going to use the best way to hack an IP address. We are going to use the only way that depends uniquely on you, not third-party services. Because of that, it will always work.
Furthermore, it is simple to apply and easy to use.
What’s behind our technique
The idea behind our technique is simple. You basically give your victim a link: they can open it with their mobile, PC, or any sort of device. On that link, they will see an image of your choice (we recommend using a fun one). However, your system will also track automatically their IP address and more information, like the browser they are using and their operating system.
While this happens, they will see the fun image and have a laugh about it. They have no way of knowing that you are tracking their IP address.
Step #1 – Register a website (for free! )
You want to give your victim a valid link to click, and it must be valid online. Therefore, we need to register a website. There are a lot of free services online to register a website, and among them, we have chosen x10 hosting. Go to their website and register a new account.
Create your account and this will give you a free website.
As a first thing, they will ask you to select a domain image. Use a credible one for the kind of images you want to share.
Select the domain name.
Continue with the registration and verify your email. Once you complete the process, you will end up on the homepage where you will have to create a website. Now you are going to say “Wait, I thought we already created that! ”… well, sort of. Until now, we created the name. Now, we have to prepare the software running behind it.
Step #2 – Creating the website itself
The home will look like the one below. From there, just click the green Add Website button on the top right.
Click on “Add Website”.
A quick wizard will open. From there, we have to tune a few items. Before everything else, select “Custom Website” website. Then, as a website name, write something that reminds the website, like its domain name. As the last thing, leave the address path empty. Then, click on Add Website.
Website configuration.
Create the website, then select “Continue to my website” on the next page. Congratulation, we are almost there!
Step #3 – Download the IPFinder script
Now your website is ready. All we need to do is uploading the script that will take care of saving IP addresses and delivering the images to the user. Fortunately, you don’t need to write that script on your own: instead, we did it for you. It uses a PHP file, three HTAccess files, and two folders.
Our IPFinder script comes in a useful zip package that you can download for free by using the link below. Just click on it and download the zip file.
Now that you have it, don’t even unzip it. We will do that on the website directly: move on to the next step.
Step #4 – Upload the IPFinder Script
From the website pages, select the File Manager option. This will open a new window that looks similar to Explorer in Windows. A website is just a collection of files on a public server. With this File Manager, you can have a look at those files. To them, we need to add our script.
Here, select the file manager.
Once you are in the file manager, select Upload (1). This will open a new window, where you can click “Browse” and search for the file you downloaded. Select that compressed file () and wait for the upload to complete. Then, close this window and click Reload (2) in the previous window.
Upload IPFinder, then click Reload.
Now you should see a new file in the list, right below “cgi-bin”. This is our zipped package containing IPFinder, and we just need to extract it.
Step #5 – Extract the IPFinder
Select the so that its background turns blue. Then, from the top menu, select Extract.
Select the file (1) and launch the extraction (2).
A new window will pop-up. Just click on Extract File(s) without changing anything. Then, wait for the process to finish, and, as soon as it does, click the Close button. You will have some more files and folders on your list. In case you don’t, just hit the Reload button as we did previously.
At this point, I recommend you to delete the file. You don’t need it anymore, as we have extracted its content. So, just click it and then click the delete button at the top. This step is not mandatory, but it is a good practice.
Step #6 – Adding images
Our IPFinder comes without images. However, it is a script that shows an image and logs the IP of the viewer. Therefore, you need to add your own images. So, find a jpeg image that you think would work for this purpose. At the moment, our script only supports JPEG/JPG images. Once you have that image, rename it with a simple name without spaces. Then, double-click on the images folder to view its content.
Doube click on the images folder.
Once you are in, you will see only a. htaccess file. That’s OK, now upload the image the same way we uploaded the IPFinder script. For example, we will be using an image named Now click “Up One Level” to return to the main folder.
Step 7# – Using IPFinder
Now your IPFinder is ready to go. How do we use it? It is very simple, as it automatically creates the URL we need. Your URL to share with your victims will be something like this one.
In this URL, each part is customizable.
The domain name is the name of your website, the one you selected when you created the account. You won’t be able to change this. In our case, this is “coolimages” image name is the name of the picture you uploaded, so in our case, this is “”The user ID is something you should select carefully. Here you can write any combination of letters and numbers you want. Now we will see how to use it
Selecting the User ID
IPFinder will save a new text file for each victim that sees the image in the log folder. That file contains the date, time, and the User ID you specify. The purpose of this field is to let you differentiate between users. Think about it, what if you want to give the link to multiple people? How can you know which IP corresponds to which person? You cant. With this approach, you would send to John the link to / and to Alice the link to / They will both see the same picture, but you will log their IPs separately.
Hack IP addresses, getting the results
Browse the log folder. You will see some text files with the names explained above. Open any of them and read their content (select it and click Edit). In each, you will see something like this.
IP:
Browser info: Mozilla/5. 0…
Note that for privacy we have hidden some parts of the IP address and some parts of the browser info in this example. However, from your script, you will get the entire IP address and the full browser information.
What can you do with hacked IP addresses?
At this point, you have your IP finder in place. You shared some images, thus getting some IP. You can know truly hack IP addresses, but you are still wondering what can someone do with IP addresses. On the other hand, you might be the one who believes to be hacked, and you want to know if you are in real danger. Look no further, here we will tell you the ultimate truth about what happens after you hack IP addresses.
Hack IP addresses to scare people
A lot of self-proclaimed hackers hack IP addresses just to scare people. They contact the person and tell them they know their IP address, and maybe their browser. A normal PC user will believe they have accessed their PC, how would they know which browser they use otherwise? So, people get scared and start believing in the hacker.
I’ve heard stories about “hackers” who managed to extort money from someone with this approach. They basically make them believe they had access to their data and threatened to share some personal pictures or something like that. The truth is, they didn’t even know if those pictures really existed. However, they approached everyone with the same words. As a result, they would scare the hell out of anyone holding such kind of pictures. Of course, such activity is illegal.
Geolocating you
If you get someone’s IP address, you can geolocate it very approximately. The location will be a few square kilometers accurate in urban areas, and a few dozens square kilometers accurate in rural areas. This is a rule of thumb and might vary, but you will be never accurate enough.
Only your service provider, and thus the police, can locate you precisely with your home address. For the others, you need to get by with only knowing the city or county.
Truly gain access to the device or to personal data
If someone knows your IP address, he can scan you. This means he can try to detect the system you are running and your vulnerabilities. Now, since the public IP address of yours is on your home router, they will do that for your router. They will gain access to your router and, from that, they will adopt the same approach to gain access to your PC.
This process is long and complex and requires a skilled hacker. However, it always follows the same guidelines.
Find exposed services (with nmap) and try to detect the hardware and software version with the TCP signatureLook for common exploits on the exposed services, or for that specific hardware/softwareTry to gain access with brute forceTry to create a custom exploit
Of course, the fourth step is so hard that many hackers will simply give up. That step if for someone with skills and budget that wants to hack specifically you.
How can I defend myself?
In many connections, rebooting your router will change your public IP address. That’s it. If a hacker was attacking you, they will have to find your IP again.
Furthermore, you can increase the level of security by using a VPN or a proxy chain like TOR. In this case, you basically contact a server you trust (maybe own) somewhere on the Internet. Then, that server makes requests on the web for you. In case someone tracks your IP address, they will track the IP address of that server. This is for a whole new article, however.
Conclusion
In this article, we have presented how to hack IP addresses. If you followed our guide carefully, you have now a website you can use to hack IP addresses silently. You also know what to do with such addresses, and hackers do with them. Now it’s up to you! Go out there and practice this technique, but be always conscious of what you’re doing.
What are your thoughts on hack IP addresses? Do you feel safe? Did you manage to scare a friend of yours? What would you like to learn after this? Just let me know in the comments!
How a Hacker Might Exploit Your IP Address
A hacker is simply an online vandal, if you think about it. What do vandals do but damage things that don’t belong to them, for no good reason other than to do it. A hacker wants to worm his way into a network of his choosing to do serious (or not-so-serious) damage, such as stealing email addresses or your personal data.
Hacking is mostly focused on causing trouble for big companies and government agencies. But anything is fair game, and that’s why some junior hackers will stoop so low as to hack the IP addresses of our computers, just to mess things up for a bit.
Your network identifier: an IP address.
As you likely know, every computer that is connected to a network or the Internet has its own IP address. Everyone on the Internet has to have an IP address to send emails, look up information or buy online. It’s as simple as this: When you’re connected, you have an actively working IP address. And depending on where you are, your IP address can change.
A lot of Internet chatter that says our IP addresses can reveal our identities is not accurate. As experts have pointed out, if our IP addresses were truly the gateway to all of our personal and private information, then the entire Internet would be one big mess. But fortunately, our IP addresses alone do not make us easy targets.
Unfortunately, that doesn’t mean hackers will leave IP addresses alone. Remember—hackers simply like to mess things up, so they’ll still see what disruption they might be able to cause.
But just how would the hacker get into your computer anyway?
Ports: like doors to your home.
In the world of TCP/IP, the interface between the networks and your programs occurs through a system of electronic channels called ports. Each of these ports has a unique number that identifies it. So, in a sense, the ports are pipelines in the computer through which data can flow to and from a particular application and the network protocol software.
Each IP address has ports associated with it. Those ports are an important part of your computer system: Several programs (applications) might be running on the same computer, and the built-in network software on your computer needs to have a way of knowing what incoming packet of data is intended for what application. It needs to know, for example, how to send incoming emails to your email program.
That’s how that happens.
A building with rooms.
So we have IP addresses, ports and programs. Think of them as an address on your computer, a doorway into a room, and a room itself. With this picture in mind, look at your port as a back door that allows entry into your house…your computer. Completing the analogy, the room is a single application (program) you’re running.
If you’re connected to the Internet and running a program, a related port (identified by a number) will be open. That’s good for you, but it could allow someone who knows your IP address (an outsider, a hacker) access into your connection, with some ability to engage or affect the program you’re running.
Behind the door.
Fortunately, each room/program is somewhat self-contained and doesn’t have connecting doors to the other “rooms” in your computer. So, even if a hacker gets your IP address, sneaks into your port through the big back door and gets into your program, that’s as far as they can go.
Is there a way to block the door? Yes. That’s where a firewall comes into the picture. It essentially blocks intruder activity from getting through the ports.
Making your IP address invisible.
One way to keep hackers at bay is to hide your true IP address. One way to do this is to set up a personal Virtual Private Network (VPN). With a VPN, your online requests are routed through a vast network of computers, and you use a temporary VPN to communicate online. A hacker would not see your true IP address and wouldn’t be able to connect to your computer.
For more information, see our pages on hiding an IP address and Virtual Private Networks.
Related Articles
What is Hacking?
What is Malware?
Building a Better Password
Best Hacking Tools · LoginRadius Engineering
Ever since you enter the sphere of ethical Hacking, you usually need to get your hand on most of the Hacking Tools. The more tools you recognize, the more your hacking career is getting ready to fly off. Therefore let’s discuss some of the necessary hacking tools.
1. ) Nmap
It is a free and open-source tool that’s used for network discovery and security auditing.
Nmap is a powerful tool because it is often used to scan vast networks having thousands of machines. It’s a command-line tool. Nmap suite additionally includes a complicated GUI that’s referred to as “ZenMap”.
It supports a large variety of OS that is:
Linux
Microsoft Windows
Mac OS X
FreeBSD
OpenBSD
Solaris
IRIX
It uses raw IP packets to determine
Hosts that are accessible on the specific networks.
Services that are offered by hosts, i. e., Application name together with its versions.
Operating system and its version running on the target system, type of firewall on the target system.
Scans for the exploitation of the open port, both TCP and UDP protocols.
Nmap download link:
2. ) Metasploit
It is essentially a Security Assessment and Penetration Testing tool. Metasploit is often used to launch an attack on alternative systems with it.
It uses a vulnerable system on that security testing may be conducted to use the failings within the system.
Metasploit may enforce as follows:
Initially, protocol port scanning is complete to get data concerning the target system.
Host lists and services running on them may be read and analyzed within the project view.
Now, the vulnerability scan runs on the target system’s information that enlists the failings inside the system.
This data used for designing the attack on the target system.
Metasploit download link:
3. ) Wireshark
It is an open-source tool that’s used to capture traffic on the network. It’s essentially a network protocol analyzer tool.
Wireshark helps in:
Sniffing for the passwords.
Identifying the destination and source IP address of the traffic.
Capturing all the packets over the network.
Next, we tend to enter the valid John the Ripper command that is used to extract the password from the hash password given as an input.
It additionally captures HTTP packet transmission over the network. Click on “Follow protocol connection” within the HTTP packet. Currently, you’ll be able to see the username and passwords that are captures over the network.
Wireshark download link:
4. ) John the Ripper
JTR is free and open-source software that’s wide employed by hackers for password cracking. It uses the varied cryptanalytics attacks like “Dictionary Attack” and “Brute-Force Attack”.
It additionally comes with the business version moreover, i. e., “John the Ripper Professional. ” It’s a lot of accessible versions providing a lot of practicality in password cracking at the enterprise level.
John the Ripper working:
Initially get the hashed password that needs to be crack.
We need to possess a wordlist of expected passwords in our system because it makes the password cracking job easier.
Next, we tend to enter the valid John the ripper command that is used in extracting the password from the hash password given as an input.
The rate at which the password is going to be cracked depends utterly on the password’s strength and offered wordlist. It keeps attempting to break the password continuously till the termination command isn’t given.
John the ripper download link:
5. ) Burp Suite
It is an integrated platform that’s used for activity a check on net application security.
It provides a large variety of tools that are used from initial mapping to exploiting the applications’ vulnerabilities. Once the issues are detected, hackers will use it to break into the security of the system.
Burp Suite comes in 3 editions:
Community Edition: It is available free of charge for downloading.
Professional Edition: Penetration testers and bug bounty hunters utilize it.
Enterprise Edition: An organization utilizes it.
Burp Suite features:
It may be used to launch attacks on internet Applications. It will check and detect Cross-site scripting (XSS) and SQL injection.
It operates as an internet proxy server that helps permit interception, inspection, and modification of network traffic.
Burp Suite download link:
6. ) Angry IP Scanner
It is one of the quickest IP addresses and port scanner. By exploitation, this hacker will gather data concerning open ports within the target system.
It pings every IP address within the target system to see whether it’s active or not. Further, it resolves the hostnames and determines the MAC address.
Features:
It additionally extracts the NetBIOS data, which has services associated with the session layer within the OSI model that are workgroup names and current active users.
Scanned results may be saved in CSV, TXT, XML, or IP-Port list files.
It will gather any data concerning scanned IP’s because it uses plugins.
If anyone writes plugins, he will efficiently extend the practicality of Angry IP Scanner.
Angry IP Scanner download link:
7. ) Nikto
It is a web-server assessment tool. It is an open-source platform that performs tests against web servers to seek multiple vulnerable files, misconfigurations, out-of-date servers, and programs on its web server.
It depends on HTTP response to seeing whether or not a page or script exists on the target.
Provides HTTP proxy support.
Checks for the out-of-date server parts.
It will scan multiple ports on the server.
Guesses credentials for authorization with attempting many alternative ID and password combos.
Reports for the weird headers.
Nikto download link:
Do you want a free authentication solution? Add the world’s most secure, reliable and easy to implement user authentication solution on your applications at $0Get Started Free
